Sony Multiport Connector Pinout
Sony Multi Terminal Connector Pinout
Sony 10 pin “D” Connector Pinout
Sony LANC Pinout
Canon LANC Pinout

Pin Out Chart for the Sony Multiport Connector or the Sony Multi Terminal Connector

The pin out chart is for the way we have our Sony Multiport Connector labeled.  The information below came from Sony and other sources and it is accurate to the best of our knowledge.  This information if for Sony camcorders and Sony cameras from 2014 to today.   Please Note:  The 2013 Sony Camcorders had the Multiport or  Multi Terminal connection, but it may not be wired as listed below.

Not all functions may be provided by all camera/camcorder models.

You can NOT control the camera with a wired remote control while providing video/audio output using the Multi USB terminal. You have to use the HDMI output when you are connected to a wired remote control. This is just the way Sony has designed the multiport or multi terminal to work.

Sony 10 pin “D” Connector Pinout

NOTE: Sony uses a LANC select signal. This tells the camera that a LANC controller is connected. You MUST connect pins 7 and 8 together using a 100k ohm resistor if you are connecting a LANC controller to the camera. Otherwise, the LANC will not be functional.

Not all functions may be provided by all camera/camcorder models.

We do NOT sell the Sony 10 pin D Connector.

Sony LANC Pinout
Canon LANC Pinout