• These cables only work with the Sony Brand Remote Control units, which are the Sony RM-VPR1 and the Sony VCT-VPR1 tripod remotes. These cables have a male Multiport connector on both ends, allowing you to extend the distances between the remote and the camera. They are heavy duty and made with heavy gauge wires so there will not be any signal loss between the remote and the cameras.. These extension cables are perfect for use with End Zone camera and Sideline camera setups.
  • These cables only work with the Sony Brand Remote Control units, which are the Sony RM-VPR1 and the Sony VCT-VPR1 tripod remotes. These cables have a male Multiport connector on both ends, allowing you to extend the distances between the remote and the camera. They are heavy duty and made with heavy gauge wires so there will not be any signal loss between the remote and the cameras.. These extension cables are perfect for use with End Zone camera and Sideline camera setups.
  • Works ONLY with the Sideline Power Remote, JJC SR-F2, JJC TP-F2 and Revo VRS-Multi Remote Control Units.
    • Extends the distance between the Camera and Remote.
    • Double Check your remote as this is a NON-RETURNABLE Item
  • Works ONLY with the Sideline Power Remote, JJC SR-F2, JJC TP-F2 and Revo VRS-Multi Remote Control Units.
    • Extends the distance between the Camera and Remote.
    • Double Check your remote as this is a NON-RETURNABLE Item
  • These cables only work with the Sony Brand Remote Control units, which are the Sony RM-VPR1 and the Sony VCT-VPR1 tripod remotes. These cables have a male Multiport connector on both ends, allowing you to extend the distances between the remote and the camera. They are heavy duty and made with heavy gauge wires so there will not be any signal loss between the remote and the cameras.. These extension cables are perfect for use with End Zone camera and Sideline camera setups.
  • These cables only work with the Sony Brand Remote Control units, which are the Sony RM-VPR1 and the Sony VCT-VPR1 tripod remotes. These cables have a male Multiport connector on both ends, allowing you to extend the distances between the remote and the camera. They are heavy duty and made with heavy gauge wires so there will not be any signal loss between the remote and the cameras.. These extension cables are perfect for use with End Zone camera and Sideline camera setups.
  • The Pan Tilt Cable extension has a 30-Day Warranty for manufacturing defects and a NON-RETURN Policy. The warranty does NOT cover misuse, water damage, dirt, sand, mud or damage to the cable, connectors or pins in the connectors or any other damage caused by the end user.
  • The Shielded LANC extension cable has a 30-Day Warranty for manufacturing defects and a NON-RETURN Policy. The warranty does NOT cover misuse, water damage, dirt, sand, mud or damage to the cable, connectors or pins in the connectors or any other damage caused by the end user. 
    Shielded LANC extension cables for ALL LANC Controllers.
    • 25 ft
    • Fully shielded data cables – heavy duty so you can use them in all types of environments.
    • Multiple LANC Cables CAN be connected together, if you need to make longer runs.
    A LANC Extension Cable is used when you need to make a longer cable run between your video camera and the LANC controller that you are using, such as if the video camera is mounted on a End Zone Camera Pole or on a Jib Arm or when ever the camera is mounted where is it out of your reach.
  • Works ONLY with the Sideline Power Remote, JJC SR-F2, JJC TP-F2 and Revo VRS-Multi Remote Control Units.
    • Extends the distance between the Camera and Remote.
    • Double Check your remote as this is a NON-RETURNABLE Item
  • Works ONLY with the Sideline Power Remote, JJC SR-F2, JJC TP-F2 and Revo VRS-Multi Remote Control Units.
    • Extends the distance between the Camera and Remote.
    • Double Check your remote as this is a NON-RETURNABLE Item
  • These cables only work with the Sony Brand Remote Control units, which are the Sony RM-VPR1 and the Sony VCT-VPR1 tripod remotes. These cables have a male Multiport connector on both ends, allowing you to extend the distances between the remote and the camera. They are heavy duty and made with heavy gauge wires so there will not be any signal loss between the remote and the cameras.. These extension cables are perfect for use with End Zone camera and Sideline camera setups.
  • These cables only work with the Sony Brand Remote Control units, which are the Sony RM-VPR1 and the Sony VCT-VPR1 tripod remotes. These cables have a male Multiport connector on both ends, allowing you to extend the distances between the remote and the camera. They are heavy duty and made with heavy gauge wires so there will not be any signal loss between the remote and the cameras. These extension cables are perfect for use with End Zone camera and Sideline camera setups.
  • The Pan Tilt Cable extension has a 30-Day Warranty for manufacturing defects and a NON-RETURN Policy. The warranty does NOT cover misuse, water damage, dirt, sand, mud or damage to the cable, connectors or pins in the connectors or any other damage caused by the end user.
  • The Shielded LANC extension cable has a 30-Day Warranty for manufacturing defects and a NON-RETURN Policy. The warranty does NOT cover misuse, water damage, dirt, sand, mud or damage to the cable, connectors or pins in the connectors or any other damage caused by the end user. 
    Shielded LANC extension cables for ALL LANC Controllers.
    • 35 ft
    • Fully shielded data cables – heavy duty so you can use them in all types of environments.
    • Multiple LANC Cables CAN be connected together, if you need to make longer runs.
    A LANC Extension Cable is used when you need to make a longer cable run between your video camera and the LANC controller that you are using, such as if the video camera is mounted on a End Zone Camera Pole or on a Jib Arm or when ever the camera is mounted where is it out of your reach.
  • Works ONLY with the Sideline Power Remote, JJC SR-F2, JJC TP-F2 and Revo VRS-Multi Remote Control Units.
    • Extends the distance between the Camera and Remote.
    • Double Check your remote as this is a NON-RETURNABLE Item
  • Works ONLY with the Sideline Power Remote, JJC SR-F2, JJC TP-F2 and Revo VRS-Multi Remote Control Units.
    • Extends the distance between the Camera and Remote.
    • Double Check your remote as this is a NON-RETURNABLE Item
  • These cables only work with the Sony Brand Remote Control units, which are the Sony RM-VPR1 and the Sony VCT-VPR1 tripod remotes. These cables have a male Multiport connector on both ends, allowing you to extend the distances between the remote and the camera. They are heavy duty and made with heavy gauge wires so there will not be any signal loss between the remote and the cameras.. These extension cables are perfect for use with End Zone camera and Sideline camera setups.
  • These cables only work with the Sony Brand Remote Control units, which are the Sony RM-VPR1 and the Sony VCT-VPR1 tripod remotes. These cables have a male Multiport connector on both ends, allowing you to extend the distances between the remote and the camera. They are heavy duty and made with heavy gauge wires so there will not be any signal loss between the remote and the cameras.. These extension cables are perfect for use with End Zone camera and Sideline camera setups.  
  • The HDMI Cables has a 30-Day Warranty for manufacturing defects and a NON-RETURN Policy. The warranty does NOT cover misuse, water damage, dirt, sand, mud or damage to the cable, connectors or pins in the connectors or any other damage caused by the end user. 
  • The Sideline Power Remote Controller for Sony Camera has a 30-Day Warranty for manufacturing defects and a NON-RETURN Policy. The warranty does NOT cover misuse, water damage, dirt, sand, mud, or any other damage caused by the end user. 
  • The Motorized Pan & Tilt Head has a 90-Day Warranty for manufacturing defects and a NON-RETURN Policy. The warranty does NOT cover misuse, water damage, dirt, sand, mud, or any other damage caused by the end user.  The Bescor MP-101 Motorized Pan & Tilt Head attaches between a tripod and camera and enables panning and tilting the camera remotely. Two independent motors smoothly operate horizontal and vertical motion at adjustable speeds. The head supports payloads up to 6 lb. The mounting points are a 1/4″ tripod mount thread underneath and a 1/4″ camera mount stud above. All tripods and cameras are compatible. An Auto Pan Mode allows for continuous panning motion, and a switch selector lets you assign end points at 45°, 90°, or 340°. The maximum horizontal angle is ±170 degrees, and the maximum vertical angle is ±15 degrees. This head can be powered by four AA batteries, Bescor PS-260 AC power supply, or Bescor 90-645 external battery, all sold separately.
    • Enables panning and tilting a camera remotely at adjustable speeds
    • Attaches between a tripod and camera
    • 6 lb payload
    • 1/4″ tripod / camera mounts
    • Remote control included
  • The Pan Tilt Remote has a 30-Day Warranty for manufacturing defects and a NON-RETURN Policy. The warranty does NOT cover misuse, water damage, dirt, sand, mud or damage to the cable, connectors or pins in the connectors or any other damage caused by the end user.

Title